CONTENTS SPECIFICATIONS Panel function description Compass Power supply DC 12V Remote control function Counter Power range 10.8-16.0V DC Max operate current Turn on/off Host GPS Navigation Function Operation Ground system Negative ground Access main interface Bluetooth 2.0, class II Other functions Audio RCA 4 Output, RCA 2 Input Wallpaper and Logo Setup...
Accessories WIRING DIAGRAM 5. RESET Panel function description Press this button can back to default mode. This player is equipped with ISO standard connector, please follow Accessories below instruction: 6. USB slot ● Red - ACC ON (+12V) Left Bracket Connect USB mobile device to read video, audio and image files ●...
Remote control function Troubleshooting 4. SOURCE button PROBLEM CAUSE CORRECT ACTION Press this button to choose audio sources. Check fuse Change fuse same as the old one 5. EQ button Cannot power on Press RES button on the panel by penpoint, then, Press this button at the can switch between different modes.
Page 5
System setting General Settings 24. SETUP button 15. 0-10+ button In the General Settings screen click [SYSTEM] icon to enter the In audio mode, press this button to choose different set items. In the set interface click [GENERAL] icon, into the General set Press this button to choose desired song, section, preset stations.
Turn on/off Host Touch calibration Steering wheel setting If touch calibration error occurs, you can adjust the touch Click the settings interface [STEER] icon into the steering wheel When the ignition switch is put in ACC or ON position, Press [ ] button on the front panel to turn on the unit.
Basic operation setup menu Audio setting Radio Function Operation In the set interface click [AUDIO] icon, into the Audio set interface. 1. Enter/exit Access setup interface Touch [Radio] icon in the main interface to enter into the radio interface. Click on the main screen [Setup] icon, enter the setting interface. Touch [ ] icon to return to main interface, and then touch other function icons so as to exit With a finger or touching pen to gently sliding screen can be set...
Disc Function Operation Other function operation 1. Play/eject disc Rearview function Play disc In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial Insert the disc into the disc slot with the printing surface up, system will detect the disc and automatically take it in to read and play. running state after reversing the car.
COMPASS Forward/Backward play Repeat play Click the button, forward/backward play. In the main interface touch [COMPASS] icon, into a compass interface. In playing state, touch this button to start repeat play function: Chapter repeat → Title repeat → Entire disc repeat → Off.
MUSIC function operation BT Function Operation Random play Play/Pause Sound settings 1. Enter/exit Connect to Music first, touch [Music] icon on main interface to access Music Touch [BT] icon in the main interface to enter the BT interface, as PIC 1: interface, as shown in below diagram.
Need help?
Do you have a question about the Boyo AVN675D and is the answer not in the manual?
Questions and answers