Harbor Freight Tools AM/FM 94670 Assembly & Operating Instructions page 8

Battery
Cover (11)
Flash
Earphone Jack
Power Indicator
Low Power
Indicator
1. Set the Flashlight Switch (21) to FLASH to turn on the Flashlight.
2. To turn on the Lamp, set the Flashlight Switch to TORCH.
3. If neither the Flashlight nor the Lamp are being used, set the Flashlight Switch to OFF.
1. Turn the Volume Knob (16) clockwise to turn the Radio "ON" and to adjust to the desired
volume level. To turn "OFF", turn the Volume Knob (16) counterclockwise until a click is
heard.
2. Move the Band Knob to FM or AM.
3. Turn the Tuning Knob (15) to the desired radio station.
1. Plug the Adaptor into the Jack located on the side of the Radio-see Figure 3. Plug into a
electrical socket. Disconnect before using Radio.
SKU 94670
Figure 1-Rear View
Figure 2-Front View
Handle (2)
Using the Flashlight/Lamp
Setting the Band Selector-AM/FM
Turning the Radio On/Off
Using the Adaptor
For technical questions please call 1-800-444-3353.
Battery
Band
Selector
Selector
Knob
Flashlight
Switch (21)
Tuning Knob (15)
Lamp
Volume Knob/
Power Switch
Page 8