Table of Contents
Advertisement
Quick Links
DYNAMO
AM/FM BAND RADIO
94670
ASSEMBLY & OPERATING INSTRUCTIONS
Due to continuing improvement, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at www.harborfreight.com
©
Copyright
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions and replacement parts please call 1-800-444-3353.
Advertisement
Table of Contents
Summary of Contents for Harbor Freight Tools AM/FM 94670
- Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts please call 1-800-444-3353.
-
Page 2: General Safety Rules
HANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. -
Page 3: Electrical Safety
Do not use the Radio if the Power Switch does not turn it on or off. Any appliance that cannot be controlled with the Power Switch is dangerous and must be replaced. -
Page 4: Grounded Tools: Tools With Three Prong Plugs
Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the Radio should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. -
Page 5: Extension Cords
Do not mix old and new batteries. Do not use different types of batteries; do not use rechargeable and alkaline batteries. Remove batteries if the Radio is not used for a long period of time. Dispose of old batteries properly. Make certain to follow all local laws and restrictions for proper disposal. - Page 6 Do not use the Radio in places that are extremely hot, extremely cold, abnormally dusty or excessively humid. Avoid using or storing the Radio in parked cars, in direct sunlight, or near heat sources such as heaters. People with pacemakers should consult their physician(s) before using this product.
- Page 7 When unpacking your AM/FM Band Radio, check to make sure that all parts listed in the parts list on page 10 are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353.
- Page 8 Move the Band Knob to FM or AM. Turn the Tuning Knob (15) to the desired radio station. Plug the Adaptor into the Jack located on the side of the Radio-see Figure 3. Plug into a electrical socket. Disconnect before using Radio.
- Page 9 Make certain that the On/Off Switch (16) is in the OFF position and that the Radio is unplugged from its power source before performing any inspection, maintenance or cleaning. Use a soft cloth to clean the radio. Use only water or a mild detergent to clean the Radio housing.
- Page 10 Parts and Assembly Diagram Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 94670 For technical questions please call 1-800-444-3353. Page 10...
- Page 11 Wiring Diagram SKU 94670 For technical questions please call 1-800-444-3353. Page 11...