Advertisement
6. Test all bolts and nuts for tightness before turning the wagon over on its wheels. Roll the wagon to check for
proper wheel operation. Periodically check tire inflation (maximum tire inflation is 30 PSI). Periodically lubri-
cate wheel axles.
7. The Steel Flat Rack Wagon is ready to use. Use the Handle to easily turn and maneuver the wagon.
Warning:
1. Always wear ANSI approved safety goggles when assembling and working with tools and equipment.
2. The Steel Flat Rack Wagon has a weight capacity of 1000 lbs. Do not exceed this weight capacity.
3. When loading and unloading the wagon, be careful of the balance of the wagon. Always be careful of the
Handle which can tip and fall from the upright position.
4. Always block the four wheels when loading or unloading the wagon.
5. Never allow children to play with the wagon. This wagon is not a toy.
Item #38137
Part Number Listing
Part
Description
A
Assembly Hardware
B
Tray
C
Rear Bracket
D
Turning Bracket
E
Handle
F
Wheels
*Hardware includes: 1 Bolt M6x63, 4 Bolts M8x38, 8 Bolts M6x20,
9 Nuts M6, 4 Nuts M8, 9 Spring Washers M6, 9 Flat Washers M6,
4 Spring Washers M8, 4 Flat Washers M8, 4 Flat Washers M16, 4 Split
Pins M3x30.
Parts Diagram
Qty
1 Set*
1
1
1
1
4
Page 2
Advertisement
