Troubleshooting - Nokia BH-606 User Manual

To mute or unmute the
microphone during a call, press
the middle of the volume key.
To switch a call between the
headset and a compatible phone,
press and hold the answer/end key
(or the power key) for about 2
seconds.
Handle two calls
To answer a waiting call and put
the active call on hold, press and
hold the answer/end key for about
2 seconds.
To answer a waiting call and end
the active call, press the answer/
end key.
To end the active call and activate
the call on hold, press the answer/
end key.
To switch between the active call
and the call on hold, press and
hold the answer/end key for about
2 seconds.
To use these features, your phone
must support the Bluetooth
Hands-Free profile 1.5, and call
waiting (network service) must be
activated in the phone.
Clear settings or reset
To delete the pairings from the
headset, switch off the headset,
and press and hold the power key
and the answer/end key for about
5 seconds.
To reset the headset if it stops
functioning, even though it is
charged, connect the headset to a
charger that is connected to a wall
outlet.

Troubleshooting

If you cannot connect the headset
to your compatible phone, check
that the headset is charged,
© 2008 Nokia. All rights reserved.
7