Sony FD Trinitron WEGA KV-32FV27 Operating Instructions Manual page 17

Installing the TV
(Continued from the previous page)
1
Connect the Cable TV cable to the TV's VHF/UHF jack.
3
Using a coaxial cable, connect the TV's TO CONVERTER jack to
the cable box's IN jack. The TV's internal converter allows you to
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitter.
Using a coaxial cable, connect the cable box's OUT jack to the
TV's AUX jack.
{;Phi( box i 0Jill couxi0 cal)k
(io SL_)C i d) AUX
I,_ _(_l:_l:_D, _ I,_aof ',/
L_
7i ol ii coaxia} cable (lot SL ppli( d}
1 VIIFiLJI F
CttlV Dblc;!tll_S¢lWI/71edcllDIlel)
Jb switch between* channels from cable box and channels from _egutar cable
Press the AN[ button on the TV remote control. (This is a toggle:
pressing the button once selects the cable box; pressing the button
again selects regular cable.)
Jb use the cable box
Have your TV tuner set to channel 3 or 4 (as appropriate) and
then use the cable box to switch channels.
Jb usethe JV remote cor_tro9 to switch channegon the caWebox
Program the remote control as necessary. (See "Programming the
Remote Control" on page 52.) Then use the remote control to
switch cable box channels.
Jb use the JV remote coetro9 to switch channeg or_the VCR
Program the remote control as necessary. (By default, the remote
control is set for a Sony VCR; to change to another brand see
"Programming the Remote Control" on page 52.) Then use the
VCR buttons on the remote control to switch channels on the
VCR.
Jb p_event the accidentaB switchieg of TV chaer_eg
When using the cable box, you need your TV to stay on a
required channel (usually channel 3 or 4). You can use the TV's
Channel Fix feature to lock in a specific channel. The Channel Fix
feature is under the Channel menu. For details, see "Using the
Channel Menu" on page 42.
12