Using The Timer - Sony FD Trinitron WEGA KV-36FV15 Operating Instructions Manual

Using the TIMER Q menu
DAYLIGHT SAVING: NO
CURRENT TIME SET
ON/OFF TIMER
_MENU
___ --:-- AM
Move_]m Select{_ Exit_
To select the TIMER (_) menu:
Display m Highlight (_ _ Select
MENU _
Tip "_"
Set DAYLIGHT SAVING before setting the clock.
DAYLIGHT
SAVING
CURRENT
TIME SET
Necessary for the
ON/OFF TIMER
ON/OFF TIMER
Wake up or
scheduled viewing
YES: Select to compensate for Daylight Saving Time.
NO: Select at the end of Daylight Saving Time.
With the CURRENT TIME SET menu open:
1 Press _.
2 Press ,* or ,I, until the current day is displayed.
Press _ to select.
3 Press * or • until the current hour and AM/PM is
displayed. Press _ to select
4 Press * or • until the current minute is displayed, and press
Any loss of power will cause these settings to be cleared.
CURRENT TIME SET
b ___ ---:_ AM
_MENU
Move_ $elect(_ Exit_
CD.
CURRENT TIME SET must be programmed before you
can use the ON/OFF TIMER.
With the ON/OFF TIMER menu open:
1 Choose the ON/OFF TIMER you would like to set and
press _.
2 Press • or • until the desired day or range of days is
displayed. Press _ to select.
3 Indicate the time that you want the TV to turn on
(hour, then minutes) by pressing • or ,I, and then _.
4 Set the time duration (maximum of 6 hours) by pressing t or • and then _.
5 Press t or • until you reach the desired channel. Press _ to select.
When you perform AUTO PROGRAM, all ON/OFF TIMER settings will be cleared.
ON/OFF TIMER
--:-- AM -h CH-__
2.......
--:-- AM -h CH---
_MENU
SeleCt a p0_ition
SUN 12:C_ AM
Mow_ Select(3_ Exlt_
21