Sony FD Trinitron Wega KV-32FS210 Operating Instructions Manual page 9

Operating Instructions
Button Description
POWER buttons Press to turn on and off the TV and other audio/
video equipment you have programmed into the
remote control. For instructions, _e "Programming
the Remote Control" on page 5.
_j_ FUNCTION buttons Press to select the equipment (VCR/DVD, SAT/
CABLE, TV) that you want to operate with the
remote control. The indicator (LED) lights up
momentarily when pressed to show which device
the remote control is operating.
_j_ PIP (Picture in Press to operate PIP feature. See "Using Picture in
Picture) Picture (PIP)" on page 24.
VCR (operating) Press to operate your VCR. The VCR must be
programmed into the remote control. For
instructions, see "Programming the Remote
Control" on page 5.
•
and I=_
Press the • button and the _ button at the same
(to record) time to record programs with your VCR. The
remote control must be programmed before you
can use REC.
_I Rewind.
Fast-forward.
P'_ Play.
• Stop.
II Pause. Press again to resume normal playback.
TVNIDEO Press to cycle through available video inputs.
DISPLAY
Press once to display the current time (if set) and
the program status such as chaPalel number,
Channel Label (if set), video input, and Video Label
(if set). Press again to turn off the display.
MTS/SAP
Press to cycle through the Multi_channel TV Sound
(MTS) options: Stereo, Auto SAP (Second Audio
Programming), and Mono.
(_)-(_
and
Press to change channels. The channel changes after
ENTER
two seconds.
GUIDE Press to display the program guide of your satellite
antenna.
_ Press tile arrow buttons to move the cursor in the
on-screen menus. Press the center button to select
an option.
MENU
Press to display the on-screen menu. f ress again to
exit the menu at any time.
CH (channel) Press to change channels. To scan rapidly through the
chamlels, press and hold down the CIi+ or CH* button.
4