Answer Or Reject A Voice Call; Call Waiting - Nokia 6233 User Manual

Make a voice dialling call
If an application is sending or receiving data using a packet data
connection, end the application before you use voice dialling in GSM. In
WCDMA it is possible to send voice and data simultaneously.
Voice commands are language-dependent. To set the language, see
Voice playback language
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialling
in all circumstances.
1. In the Homescreen mode, press and hold the right selection key. A
short tone is played, and
If you are using a compatible headset with the headset key, press and
hold the headset key to start the voice dialling.
2. Say the voice command clearly. If the voice recognition is successful,
a list with matches is shown. The phone plays the voice command of
the match on the top of the list. After about 1.5 seconds, the phone
dials the number; or if the result is not the correct one, scroll to
another entry, and select to dial the entry.
Using voice commands to carry out a selected phone function is
similar to voice dialling. See
38.

■ Answer or reject a voice call

To answer a call, press the call key.
To mute the ringing tone before you answer the call, select Silence.
To end the call or reject a call, press the end key.

Call waiting

During a call, to answer the waiting call, press the call key. The first call
is put on hold. To end the active call, press the end key.
To activate the Call waiting
Copyright © 2006 Nokia. All rights reserved.
in "Phone," p. 46.
Speak now is displayed.
Voice commands
function, see "Call," p. 45.
C a l l f u n c t i o n s
in "My shortcuts," p.
23