Advertisement
Quick Links
PORTABLE GARAGE
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE ThIS MANUAL.
Copyright
2005 by Harbor Freight Tools
©
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools. Diagrams within this
manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09k
CAR CANOPY
ASSEMBLY INSTRUCTIONS
92928
. All rights reserved. No portion of this
®
Advertisement
Related Manuals for Harbor Freight Tools BIG TOP 92928
Summary of Contents for Harbor Freight Tools BIG TOP 92928
- Page 1 © manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
-
Page 2: Safety Warnings And Precautions
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. - Page 3 If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Place 17 Steel Tubes (1) on the ground as illustrated below.
- Page 4 Connect 3-way and 4-way Tube Fittings (2 and 3) as shown below. At each junction, there is a hole through the side of the Fitting that lines up with the hole in the side of the Tube. Line up these holes on the inside of the structure and insert Self-tapping Screws (8), but tighten them only slightly at this time.
-
Page 5: Maintenance
using the T-Stakes (6). Tighten all Self-tapping Screws (8) securely. Periodically clean Tarp using mild soap and water. Periodically disassemble and apply a light oil to the Steel Tubes to prevent rusting. Item # PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY.