Dubbing Of A Cassette Tape - TECHWOOD TDX-85 Owner's Manual

Dubbing of a cassette tape

1. Open the cassette holder by pressing "
lightly and insert the tape to be played into Deck I and the
tape to be recorded on into Deck II.
2. Press dubbing button.
- Record and Dubbing indicator will light up, and direction
indicators ( / ) will blink.
3. Select the direction of the cassette tape for recording in
Deck II.
- The indicator in the selected button will stop blinking,
and the other one will go out.
4. Select the direction of the cassette tape for playing in
Deck I.
- Dubbing will start in the selected direction.
Auto Dubbing
It is convenient to use this function when dubbing the
entire cassette tape from beginning to end.
Press Auto dub button.
- The cassette tapes of Deck I and Deck II will wind them
selves backward to their end.
When rewinding is completed. Auto dubbing will start.
* Both sides of a cassette tape are recorded from beginning
to end automatically regardless of the mode.
Using HI-SPEED button
Press the Hi-speed button when dubbing the cassette
tape at a high speed.
* When dubbing at a high speed, you can not listen to the
sound out of the speaker.
To Prevent erasing of recorded sound
" PUSH OPEN
If the tab is removed, recording is impossible even though
you press REC button. This prevents recorded sound from
being erased.
To record again
9
Tab for side1
Tab for side2
The tab with driver
Tab
cover the solt with adhesive tape.