Operations; Basic Operations; Continuous Play Of Cassette Tape - TECHWOOD TDX-85 Owner's Manual

OPERATIONS

Basic Operations

1. Open the cassette holder by pressing "
lightly and insert the desired tape into either of the cassette
holders.
2. Select the correct DOLBY NR type according to how the
tape was recorded.
OFF : Select for the tape recorded without DOLBY B NR.
DOLBY B : Select for the tape recorded with DOLBY B NR.
3. Select the desired reverse mode.
: Auto stop mode.
: Auto reverse mode
: Continuous play mode
* Refer to page 10.
4. Select the desired play direction by pressing one of the
play button ( / ).
: For the forward play.
: For the reverse play.
5. Press the stop ( ) button when you want to stop play-
ing to tape.
Note :
If you press play button of Deck II while the cassette tape
of Deck I is being played, the cassette tape of Deck II will
begin to play.

Continuous Play of cassette tape

This function is to play a cassette tape continuously until
" PUSH OPEN
you stop the operation of the cassette tape.
1. Open the cassette holder by pressing "
lightly and insert the desired tape into either of the cas-
sette holders.
2. Select the
- Continuous play mode.
3. Press play button Deck I or Deck II as applicable.
- The indicator will light up and playing will start.
7
mode.
" PUSH OPEN