Technical Information - Panasonic Viera TX-L32EM5E Operating Instructions Manual

Technical Information

Auto Aspect
The optimum size and aspect are based on programmes signal format, and you can enjoy finer images.
Aspect Control Signal
The aspect will switch to the appropriate widescreen ratio.
Input terminal
Cable
RF
AV1 / AV2
(Composite)
AV2
(Component)
HDMI1
HDMI2
Auto mode
Auto mode determines the best aspect ratio based on programmes signal format (WSS, Control signal through
SCART / HDMI terminal).
This process may take several minutes, depending on the darkness of the image.
Note
The ratio varies depending on the programme, etc. If the ratio is out of the standard 16:9, black bands at the top and
bottom of the screen may appear.
If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the
tracking of the VCR. Read the manual of the VCR.
50
Input signal format
DVB-C
DVB-T
PAL B, G, H, I, D, K
SECAM B, G, L, L', D, K
PAL 525/60 6.5 MHz
PAL 525/60 6.0 MHz
PAL 525/60 5.5 MHz
M.NTSC 6.5 MHz
M.NTSC 6.0 MHz
M.NTSC 5.5 MHz
PAL
SECAM
PAL 525/60
M.NTSC
NTSC
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
1,125 (1,080) / 60p, 50p, 24p
Aspect Control Signal
Widescreen signal
(WSS)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
(p. 18)
Control signal
through SCART (pin8) /
HDMI terminal