Manually Setting Up Programme (In Analogue Mode) - LG 42PT25 Owner's Manual

36
WATCHING TV
Manually setting up programme (In
analogue mode)
Manual Tuning lets you manually tune and arrange
the stations in whatever order you desire.
1
Press Home to access the main menus.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to
Manual Tuning and press OK.
4
Press the Navigation buttons to scroll to
TV and press OK. (Only DTV)
5
Press the Navigation buttons or Number but-
tons to scroll to the desired programme Stor-
age.
6
Press the Navigation buttons to scroll to
TV System. (Except for Australia)
7
Press the Navigation buttons to scroll to
V/UHF or Cable.
8
Press the Navigation buttons or Number but-
tons to scroll to the desired channel number.
9
Press the Navigation buttons to scroll and start
searching.
10
Press the Navigation buttons to scroll to
Store and press OK.
11
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
If the TV scans a blocked programme, you
y y
will be prompted to enter your password to
keep the programme scanned.
BG : PAL B/G (New Zealand / South Africa
y y
/ Singapore / Indonesia / Israel / Malaysia /
Vietnam / Asia)
DK : PAL D/K (New Zealand / South Africa /
Singapore / Indonesia / Israel / Malaysia /
Vietnam / Asia)
I : PAL I/II (New Zealand / South Africa /
Singapore / Indonesia / Israel / Malaysia /
Vietnam / Asia)
B/B : Australia
M : NTSC-M (South Africa / Indonesia /
Israel / Malaysia / Vietnam / Asia)
To store another channel, repeat steps 6 to
y y
10.
Assigning a station name
You can assign a station name with five characters
to each programme number.
1
Press Home to access the main menus.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to
Manual Tuning and press OK.
4
Press the Navigation buttons to scroll to
TV. (Only DTV)
5
Press the Navigation buttons to scroll to
Name and press OK.
6
Press the Navigation buttons to scroll Select
the position and make your choice of the sec-
ond character, and so on. You can use an the
alphabet A to Z, the number 0 to 9, +/ -, and
blank and press OK.
7
Press the Navigation buttons to scroll to
Close and press OK.
8
Press the Navigation buttons to scroll to
Store and press OK
9
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.