Use eye and ear protection. Always wear ANSI-approved impact and chemical splash safety goggles. Coatings can produce eye irritation. When cleaning tools exercise caution when using solvents. They can be forcefully ejected from the tool’s nozzle and SKU 93119 For technical questions, please call 1-800-444-3353. Specifications...
Page 3
Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs.
Page 4
When unpacking, check to make sure that all the parts are included. If any parts are miss- ing or broken, please call Harbor Freight Tools at the number on the cover of this manual. If any part of the machine is missing or broken, please, call Harbor Freight Tools at the num- ber on the front cover, as soon as possible.
Ensure that the ports to the safety valve, gauge, and outlets are free of hardened paint or other materials which could prevent the free movement of air. Note: Occasionally check the gauge. The needle should return to zero with the pressure off. SKU 93119 For technical questions, please call 1-800-444-3353. Maintenance Page 6...
A Rubber Lid Gasket can be used when the material being sprayed is not compatible with the supplied gasket. An Intake Strainer connects to the fluid inlet tube, preventing lumps and foreign matter from entering the fluid lines. SKU 93119 For technical questions, please call 1-800-444-3353. Troubleshooting Possible Cause A broken or damaged dia- phragm.
Tank Shell Assembly Lid Gasket Lid Assembly Adapter Gauge Regulator Swivel Adapter Branch Tree Safety Valve SKU 93119 For technical questions, please call 1-800-444-3353. Parts List Part Handle Hex Nut Street Elbow Thumb Screw Yoke Assembly Cotter Pin Hinge Pin...