Listening To The Cd Changer - JVC KD-A805 Instructions Manual

Lights up when holding the digital reception
Flashes when holding the analog reception
<Auto> [Initial] Switch between digital and
analog audio automatically
<Digital> Tuning to digital audio only
<Analog> Tuning to analog audio only

Listening to the CD changer

It is recommended to use a JVC MP3-compatible CD changer (not supplied) with your unit. You can connect a CD
changer to the CD changer jack on the rear of the unit.
• You can only play conventional CDs (including CD Text) and MP3 discs.
Preparation: Make sure <Changer> is selected in the <Source Select>
1
2
3
[Turn]
• To select another folder/track while playing (for MP3 discs), repeat steps 2 and 3 above until the desired folder/
track is selected. The selection always start from disc number first.
• If another disc/folder is selected, playback starts from the 1st track of the selected disc/folder.
20
WXYZ-HD1
Select "CD-CH."
Enter "LIST" screen.
Select a disc, folder, then the track.
Playback starts automatically.
=
[Press]
• If there is no disc on the selected tray, the unit beeps.
• If no sound can be heard from the selected setting,
change the setting to <Analog> or <Digital>.
• The setting automatically changes to <Auto> if you
tuned in to or change to another station, or if you
turned off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital or analog, the
up.
=
<Ext Input> setting, see page 33.
or indicator lights