Nokia C5-03 User Manual page 100

100 Connectivity
Copy an existing access point from another group
Select the group, go to the access point to copy, and select
to other dest..
Change the priority of an access point within a group
Select Options
>
Packet data access point settings
Select Menu Settings
>
the instructions.
Edit a packet data access point
Select an access point group and access point marked with
from your service provider.
Select from the following:
Access point name — The access point name is provided by your service provider.
User name — The user name may be needed to make a data connection, and is usually
provided by your service provider.
Prompt password — If you must enter the password every time you log in to a server,
or if you do not want to save your password in the device, select Yes.
Password — A password may be needed to make a data connection, and is usually
provided by your service provider.
Authentication — To always send your password encrypted, select Secure. To send
your password encrypted when possible, select Normal.
Homepage — Depending on the access point you are setting up, enter the web address
or the address of the multimedia message centre.
Use access point — Set the device to connect to the destination using this access point
after confirmation or automatically.
Modify advanced packet data access point settings
Select Options
>
Select from the following:
Network type — Select the internet protocol type to transfer data to and from your
device. The other settings depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP address of your device.
Organise Change
>
and Connectivity
Advanced settings.
priority.
Destinations
>
Options Organise
>
Access point, and follow
>
. Follow the instructions
Copy
>