Table of Contents
Advertisement
To set the compass declination, follow these steps:
1. To access the function menu, press Suunto in the main display.
2. In the function menu, scroll to Compass with the arrow buttons and press Suunto .
3. In the compass menu, move to Declin with the arrow buttons and press Suunto .
The first row of the next window is activated.
4. Select the correct option (off/east/west) with the arrow buttons and press Suunto .
The degrees field is activated.
5. Set the degrees with the arrow buttons. The initial value is either 0.0° or the value
accepted when last setting the declination.
6. Press Suunto . You return to the compass menu.
3.3.5. Slope
The slope function is intended for measuring the degree of slope.
To measure the slope, follow these steps:
1. To access the function menu, press Suunto in the main display.
2. In the function menu, scroll to Slope with the arrow buttons and press Suunto .
When you incline the X6, it starts to display the angle indicating the degree of slope
on the screen. The sighting marks on the ring help to point to the chosen direction.
3. When the angle is selected, lock it by pressing Start . The angle remains on display.
4. To unlock the angle and start measuring the slope again, press Start .
5. To move back to the function menu, press Suunto .
NOTE: The measured value is not saved to the Suunto X6 memory!
30
Advertisement
Table of Contents
