Panasonic TX-L42FT60E Ehelp page 52

On:
Detects the particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
To view 3D images without any notifications and operations, set to
●
(Advance).
3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found or not.
Not valid when 3D Detection
●
For DVB, Component and HDMI input
●
2D 3D Depth
(Max / Mid / Min)
Selects a level of 3D-image depth for viewing converted 2D images.
3D Adjustment
(On / Off)
Adjustment of the 3D effect (except in
Set to On to enable
When setting to On, a safety precaution message will appear. Read it
●
carefully and press
When adjusting, take into account that the vision of 3D images varies
●
among different individuals.
Effect:
Adjusts the 3D depth according to the contents or to your preference. (This
setting will not be memorised when changing the input mode or channel.)
L/R Picture Swap
(L/R (Normal) / R/L (Reversed))
Swaps pictures for left eye and right eye (except in
Select R/L (Reversed)
This setting will not be memorised when changing the input mode or channel.
●
Edge Smoother
(On / Off)
is set to
2D 3D
Effect setting.
BACK/RETURN to go to
if you feel that the sense of depth is unusual.
- 52 -
On (Advance)
mode).
Effect setting.
2D 3D mode).
On