Panasonic TX-L42FT60E Ehelp page 45

When recording programmes to the USB HDD, be sure to format the USB
●
HDD and enable it to record in
Recording
■
Signal Supported Recording
(Timer Programming from the TV Guide signal)
Signal Supported Recording
information from the TV Guide; if programme start and end times are changed
by the broadcaster, the timer programming event will follow the change. Note
that Signal Supported Recording
received from broadcasters.
The availability of this function depends on the country and TV mode you
●
select.
is displayed on the
●
Recording is set.
= Note =
If you edit the start time or end time of a signal supported recording event
●
by more than 10 minutes, it will no longer follow the broadcaster's changes
to the start or end time. The start and end times will become fixed.
USB Device
USB HDD setup
is Timer Programming
only works reliably if correct information is
Timer Programming
- 45 -
Setup.
which is controlled by
screen if Signal Supported