Panasonic LUMIX DMC-LC1GC Operating Instructions Manual page 106

ª Using the specified external
flashes
• When you use the following external
flashes, the information about the ISO
sensitivity, the aperture value or other
on the camera is transferred to the
flash and then you can use various
functions of the flash such as the
adjustment of the range of the light
control according to the aperture value
or the display of the range of the light
control.
Flashes Adaptor
Metz SCA3502
54MZ-3
Metz SCA3502
44MZ-2
Metz SCA3502
70MZ-5
LEICA Not
SF-20 needed
LEICA Not
SF-24D needed
ª Available external flash settings
±
±
±
±
• Set the mode on the external flash to
either of Auto or Manual. (The [TTL]
mode cannot be activated properly.
However, TTL/GNC mode can be also
used for SF-24D only.)
• Any AE mode can be set on the
camera.
Conditions
AUTO
AUTO
AUTO
AUTO
AUTO,
TTL-GNC
± ± ±
± ± j
± j j
± ± ±
Others
• Different aperture values may be
displayed between the camera and the
external flash, but flash can be
activated properly.
106