Elan DTNR Installation And User Manual

Digital dual tuner
Hide thumbs Also See for DTNR:

Advertisement

DTNR
DIGITAL DUAL TUNER
INSTALLATION MANUAL AND USERS GUIDE
THE
LOGICAL
CHOICE
FOR
MULTIROOM
SYSTEMS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DTNR and is the answer not in the manual?

Questions and answers

Summary of Contents for Elan DTNR

  • Page 1 DTNR DIGITAL DUAL TUNER INSTALLATION MANUAL AND USERS GUIDE LOGICAL CHOICE MULTIROOM SYSTEMS...
  • Page 2: Important Safety Instructions

    The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Page i © ELAN Home Systems 2003 • All rights reserved. 11/03...
  • Page 3: Before Use

    The product shall not be exposed to dripping or splashing and that no object filled with liquids, such as vases, shall be placed on the product. Do not install this equipment in a confined space such as a book case or similar unit. © ELAN Home Systems 2003 • All rights reserved. 11/03 Page ii...
  • Page 4: Table Of Contents

    Power Cord ....................13 System Control ....................14 Programming ELAN Keypads ..............14 VIA! Touch Panel Control the the DTNR ..........14-17 IR ..................14-15 RS232 ................16-17 RS232 Protocol ..................18-19 Specifications ....................19 Limited Warranty ....................20 Page 1 © ELAN Home Systems 2003 • All rights reserved. 11/03...
  • Page 5: Congratulations And Thank You

    (for example, to go to 102.7, simply enter 1027 and you’re there). The DTNR also features a total of 120 station presets – 30 FM and 30 AM presets per tuner. When used in conjunction with ELAN VIA! Touch Panels, the combination of Direct Access tuning and a plethora of Presets makes control of the DTNR easy and intuitive –...
  • Page 6: Controlling The Dtnr Using Via! Touch Panels

    Use to search Up or Down through the band (AM or FM) selected. Hold down the STEP button for 0.5 to 2 seconds to begin search. When a station is tuned in, the tuning process will stop automatically. Page 3 © ELAN Home Systems 2003 • All rights reserved. 11/03...
  • Page 7: Rs232 Control

    Selects preset stations 1-16. Buttons can be renamed to reflect a station’s frequency (i.e. 102.7) or call letters (i.e. WNEW). Additional Presets can be accessed from the DIRECT screen (see Page 5). © ELAN Home Systems 2003 • All rights reserved. 11/03 Page 4...
  • Page 8 STORING PRESETS FROM A VIA! TOUCH PANEL (RS232 only) • Up to 30 FM and 30 AM presets can be stored in the DTNR’s memory for each tuner. That’s a total of 120 presets – 60 for TUNER1 and 60 for TUNER2.
  • Page 9: Controlling The Dtnr Using Elan Keypads

    VIA! Touch Panels, there are no messages displayed on a keypad to inform you of the DTNR’s status. Generally, the following commands might be assigned to these buttons:...
  • Page 10: Front Panel & Remote Control Operation

    Use this button to select the Preset Tuning Mode. In Preset Mode, the numeric buttons on the remote control or front panel can be used to directly access preset stations that have been stored in the DTNR’s memory. G. DIRECT button Use this button to select the Manual Tuning Mode.
  • Page 11 PRESET TUNING Up to 30 FM and 30 AM presets can be stored in the DTNR’s memory for each tuner. That’s a total of 120 presets – 60 for TUNER1 and 60 for TUNER2.
  • Page 12: Installation Manual

    The high-performance AM loop antenna provided with this unit is sufficient for good reception in most areas. To stand the loop antenna on a surface, fix the claw to the slot. Page 9 © ELAN Home Systems 2003 • All rights reserved. 11/03...
  • Page 13: Am Antenna

    ELAN preamp controller (e.g.System6, Z•630 or HD Series Input Card (HDC1020)). Make sure to connect Left channel outputs to Left channel inputs and Right channel outputs to Right channel inputs. © ELAN Home Systems 2003 • All rights reserved. 11/03 Page 10...
  • Page 14 INSTALLATION MANUAL D. IR There are multiple ways to control the DTNR via IR using either the 3.5mm (‘mini’) IR jack on the back panel or the IR SENSOR on the front panel. NOTE: There are two distinct sets of IR codes for the DTNR, one set for Tuner 1 and another set for Tuner 2.
  • Page 15 H O M E S Y S T E M S USER’S INSTALLATION MANUAL Front Panel IR Sensor Connections Using Source-Specific IR Output Ports Using the IR "ALL" Port © ELAN Home Systems 2003 • All rights reserved. 11/03 Page 12...
  • Page 16: Rs232

    When connected to an ELAN SC4 System Controller the DTNR will be controlled using RS232 Serial Communications and will provide detailed user feedback to all ELAN VIA! Touch Panels in the system. The RS232 port on the back of the DTNR can also be used to connect the DTNR to other RS-232 controllers.
  • Page 17: System Control

    *FAVORITE VIA! TOUCH PANEL CONTROL OF THE DTNR The DTNR can be controlled from a VIA! Touch Panel using either IR or RS232 serial commands. This section explains in brief the setup procedures for both options. Complete programming details can be found in the VIATOOLS 4.1 Reference Manual.
  • Page 18 USER’S INSTALLATION MANUAL access control. These templates are automatically imported with IR commands assigned to each button when you add the DTNR source button from the Special Components option in VIATOOLS. The FAVORITES Page The DIRECT ACCESS Page (Silky Blue motif shown – many other motifs are available) The FAV1 thru FAV15 buttons are factory defaulted with the following sequence of IR commands: 1.
  • Page 19: Rs232

    FM band command to AM for accessing an AM preset. As shown on the following page, two-way serial control of the DTNR provides the end user with real-time on-screen feedback of all DTNR functions.
  • Page 20 (Silky Blue motif shown – many other motifs are available) For detailed VIA! Touch Panel programming information refer to the VIA!TOOLS 4.1 Reference Manual or VIA!TOOLS Help files. Page 17 © ELAN Home Systems 2003 • All rights reserved. 11/03...
  • Page 21: Rs232 Protocol

    S10 = signal lock, mono S11 = signal lock, stereo Tuner 1 = T1 or Tuner 2 = T2 Power Command X1 = ON and X2 = OFF © ELAN Home Systems 2003 • All rights reserved. 11/03 Page 18...
  • Page 22: Specifications

    RCA Cord x 2 Rack Ears x 2 75Ω Adapter x 1 • Improvements may result in specifications and features changing without notice. • Illustrations may differ slightly from production models. Page 19 © ELAN Home Systems 2003 • All rights reserved. 11/03...
  • Page 23: Limited Warranty

    Limited Warranty ELAN HOME SYSTEMS, L.L.C. ("ELAN") warrants the DTNR Digital Dual Tuner to be free from defects in materials and workmanship for one (1) year from the date of purchase. If within the applicable warranty period above purchaser discovers such item was not as warranted above and promptly notifies ELAN in writing, ELAN shall repair or replace the items at the company's option.
  • Page 24 © ELAN Home Systems 2003 • All rights reserved. 11/03 • Second Edition • P/N: 9900156 REVC...

Table of Contents