Table of Contents
Advertisement
service precautions
1.
Before service, maintenance, or
cleaning:
a.
turn the engine switch to its
"oFF" position.
b.
allow the engine to completely
cool.
c.
then, remove the spark plug
wire(s) from the spark plug(s).
2.
Keep all safety guards in place and in
proper working order. Safety guards
include muffler, air cleaner, mechani-
cal guards, and heat shields, among
other guards.
3.
do not alter or adjust any part of
the equipment or its engine that is
sealed by the manufacturer or dis-
tributor. Only a qualified service
technician may adjust parts that
may increase or decrease gov-
erned engine speed.
4.
Wear ANSI-approved safety goggles,
heavy-duty work gloves, and dust
mask/respirator during service.
5.
Maintain labels and nameplates on
the equipment. These carry impor-
tant information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
6.
Have the equipment serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the equip-
ment is maintained. Do not attempt
any service or maintenance proce-
dures not explained in this manual
or any procedures that you are un-
certain about your ability to perform
safely or correctly.
SKU 65076
For technical questions, please call 1-800-444-3353.
7.
Store equipment out of the reach of
children.
8.
Follow scheduled engine and equip-
ment maintenance.
9.
Refueling:
a.
Do not smoke, or allow sparks,
flames, or other sources of ignition
around the equipment, especially
when refuelling.
b.
Do not refill the fuel tank while the
engine is running or hot.
c.
Do not fill fuel tank to the top. Leave
a little room for the fuel to expand as
needed.
d.
Refuel in a well-ventilated area only.
save tHese
instructions.
Page 6
Advertisement
Table of Contents
