Greyhound 66519 Set Up, Operating, And Servicing Instructions

8 ton Hydraulic log splitter
set up, operating, and servicing
Warning!
iMportant inForMation
The Hitch Coupler MUST be properly
secured to the hitch ball of the towing
vehicle. After assembly and attachment,
pull up and down on the Hitch Coupler to
make sure the hitch ball is fitting snugly in
the Hitch Coupler. there must be no play
between the hitch ball and Hitch coupler.
If there is play, tighten the Adjustment Nut
until no play is present. If the Adjustment
Nut is too tight, the Handle will not lock.
carefully read and follow the complete
instructions in this manual BeFore
setup or use.
if the coupler is not secured
properly, the ball could come loose
while the log splitter is in motion,
possibly causing property damage,
serious personal injury, or
deatH.
distributed exclusively by Harbor Freight tools
visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
save tHis Manual.
©
Copyright 2009 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
instructions
3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this manual or any artwork
66519
®
.