General Instructions and Information immediately fire the unit on the first use or when the unit has been idle for periods over 3 weeks. Allow several minutes for the power supply’s capacitors to form. Once this procedure has been followed at these times, subsequent use of the power supply requires no waiting period.
Page 4
3 weeks. Allow several minutes for the power supply’s capacitors to form. When the power supply has been used recently you may fire the unit immediately. 1205CX LV / 2405CX LV Description of Controls...
Page 5
1205CX LV Power Ratios 2405CX LV Power Ratios...
Page 6
When checking power supplies, light units and cables, be sure that is off. Look for blackened, discolored or burned pins and sockets. If a on the power supply is burned, blackened or discolored, it must be replaced before it is used. It could damage light units that are connected to it.
Need help?
Do you have a question about the 1205cx and is the answer not in the manual?
Questions and answers