Advertisement
All manuals and user guides at all-guides.com
Instruction Manual
Welcome to Speedotron
Thank you for purchasing Speedotron Black Line equipment.
The name Speedotron is synonymous with professional
workmanship and the finest electronic flash equipment available.
Backed by years of experience, our engineers have developed
the Black Line system to take the rigors of daily professional use
with consistently outstanding results.
For more than 60 years, Speedotron's reputation has grown
without much fanfare or advertising. Over the years, we have
found that a satisfied user is our best salesman. We are
determined to serve you well and offer the most efficient,
competent and courteous service anywhere.
If this is your first Speedotron purchase, this guide will help
you get the most out of your new equipment. If you've
purchased and used our equipment before, much of this
information will be familiar. In either case, we advise going over
this manual thoroughly. It contains vital information on the care
and proper use of all (including the latest) Speedotron products.
This manual is not a photographic handbook; only information
pertinent to basic operation is given. If you have questions about
how to handle a particular lighting situation or other application
that is not discussed, please contact us and we'll answer your
questions as best we can.
The equipment you have purchased is heavy-duty, durable
equipment that will stand up to continuous use either on
location or in the studio. However, there are certain operating
procedures that should be adhered to insure maximum
performance. Treated with a reasonable care, your Black Line
system will provide you with dependable, consistent, long
lasting service.
Please help us to get to know you and fulfill our obligations
to you. Return the enclosed warranty registration card (found in
the center of this manual) to us immediately. Sending in this
card will validate your warranty and put your name on our
mailing list.
Speedotron Corporation
310 South Racine Avenue
Chicago, Illinois 60607
312/421-4050 - FAX: 312/421-5079
info@speedotron.com
www.speedotron.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Speedotron 2403CX
Summary of Contents for Speedotron 2403CX
- Page 1 If this is your first Speedotron purchase, this guide will help you get the most out of your new equipment. If you've purchased and used our equipment before, much of this information will be familiar.
-
Page 2: Table Of Contents
Operating Instructions ............... 7 warranties, not by Speedotron. Flash tubes, are covered for a period of one year only, and the length of manufacturer’s warranties on modeling lamps varies.The Speedotron two-year 2403 Power Ratios ................ -
Page 3: Power Supplies
This will only • A slave tripper (Speedotron #23510) may be installed in the Sync socket to occur if the light units are the same and have the same flash tube, reflector, fire the power supply. -
Page 4: Description Of Controls
Changing the power level by a third f-stop or so is done very rapidly 4) 400Ws Isolate/Combine — when in isolate, this switch isolates the with the 2403CX LV; the Ready light will usually remain on) The power supply 400Ws channel from the 1200Ws channel and provides two Light Unit is now charged to the selected level, and ready to fire. - Page 5 All manuals and user guides at all-guides.com 2403CX LV Power Ratios...
-
Page 6: General Maintenance And Care
Check that all cables on power supply and light units are properly connected. Also check for afterglow. If a circuit breaker blows, it is an • Do not attempt to make repairs to your Speedotron equipment indication that something is wrong. Normal operation will not blow circuit yourself. - Page 7 All manuals and user guides at all-guides.com...
-
Page 8: Plus-3 Protection Plan
Protection Plan can only be purchased at the time you buy your equipment. Flash tubes, Once approved, this form will be returned to you and a copy will be kept in Speedotron’s modeling lamps and shipping charges are not covered. - Page 9 I have read, fully understand, and agree to the terms and conditions of this agreement. Customer Name _________________________________________________________________ Signature________________________________________________________________________ Speedotron acceptance: Speedotron agrees to provide repair service for the equipment listed in this agreement, according to the terms and conditions set forth herein. Authorized Speedotron Official _____________________________________________________ Signature________________________________________________________________________...
Need help?
Do you have a question about the 2403CX and is the answer not in the manual?
Questions and answers