Table of Contents
Advertisement
Charging the Battery
Charge the battery before using.
1
Connect the AC mains lead.
• The AC mains lead does not fit
entirely into the AC input terminal.
A gap will remain as shown
below.
• The [POWER] Indicator A lights.
• The battery cannot be charged
when the DC cable is connected to
the AC adaptor.
2
Attach the battery to the AC
adaptor.
• When the [CHARGE] Indicator B
lights, charging starts.
• When the [CHARGE] Indicator B
turns off (in about 90 minutes),
charging is finished.
Preparation
3
Detach the battery.
¬ Suggestions/Tips ¬
• After use, be sure to disconnect the
AC mains lead.
• The battery becomes warm after use/
charge or during charge. The camera
also becomes warm during use.
However, it is not a malfunction.
• The battery and AC adaptor are
designed only for this camera. Do
not use them with any other
equipment.
• Do not disassemble or alter the AC
adaptor.
12
Advertisement
Table of Contents
