Fitting Optional Rack-Mount Brackets - SoundCraft MFXI User Manual

FITTING OPTIONAL RACK-MOUNT BRACKETS

The rack-mount kit is included with the MFXi12/2 and MPMi12/2.
For MFXi8/2 the rack-mount bracket kit is part number RW5765. This may also be used on the MFXi 20/2
and MPMi 20/2 for furniture mounting.
WARNING: ensure that the mixer is disconnected from the mains supply
and all other equipment before fitting the rack-mounting brackets.
A
Remove the screw at point
Attach the rack brackets to both sides of mixer at points
Keep the side mouldings in case you want to re-fit them at a later date.
48
Undo and remove the screws at
B1 repeat on the other side of the mixer. ,
and remove the side mouldings.
A
A
with the screws
B2
removed at A
B2
Soundcraft MFXi MPMi User Guide 0410
and B1 above.
B1