Entering text
You can use multitap text input or T9™
Text Input
to enter text. The T9 Text
Input method uses a built-in dictionary.
To change text input method
•
When you enter text, press and hold
down
.
To shift between capitals and lower-
case letters
•
When you enter text, press
To enter numbers
•
When you enter text, press and hold
down
–
To enter full stops and commas
•
When you enter text, press
To enter a symbol
1
When you enter text, select
Add
symbol.
2
Scroll to a symbol and select Insert.
To enter text using T9™ Text Input
1
From standby select, for example,
Menu
>
Messaging
Message.
2
If
is not displayed, press and hold
down
to change to T9 Text Input.
3
Press each key only once, even if the
letter you want is not the first letter on
This is an Internet version of this publication. © Print only for private use.
.
.
.
Options
>
Write new
>
the key. For example, to write the word
"Jane", press
Write the whole word before looking at
the suggestions.
4
Use
or
5
Press
To enter text using multitap
1
From standby select, for example,
Menu
>
Messaging
Message.
2
If
is displayed, press and hold down
to change to multitap text input.
3
Press
desired letter appears.
4
When a word is written, press
add a space.
To add words to the built-in dictionary
1
When you enter text using T9 Text
Input, select
2
Write the word using multitap input and
>
select Insert.
,
,
to view suggestions.
to accept a suggestion.
>
Write new
–
repeatedly until the
Options
Spell
word.
>
Getting started
,
.
>
to
17