Plus Dialing - Motorola i90c User Manual

90
• press # while the voice mail greeting is being played
• enter your PIN to access your messages
You can program your phone to enter all of the above information for you by
separating each entry with a pause. The stored data would look like this:
17035551234P#P1234. In this example, the first eleven digits represent the
number that must be dialed to access your voice mail. The P represents a 3
second pause. The # interrupts your greeting. The second P represents another 3
second pause. The last four digits represent your PIN.
To create a three-second pause, follow the steps below:
Press and hold * for two seconds. The pause symbol (P) will appear
on the display screen.
NOTE: You can enter up to 20 characters in a single entry, stored or
dialed. You can program your phone to pause for more than 3
seconds. Performing the above step twice will program two
pauses and cause your phone to wait 6 seconds before entering
the next set of numbers.

Plus Dialing

This feature enables you to place an international call from most countries —
without entering the local international access code. Use Plus Dialing for all
Phonebook entries if you plan to travel outside the United States. Begin by
following the instructions for "Adding Phonebook Entries" on page 46. Before
you type the phone number to be stored:
Press and hold 0 for two seconds. A "0" appears, then changes to a
1
"+".
NOTE: The network translates the "+" into the appropriate
international access code needed to place the call.
2
Enter the country code, city code, or area code (as needed), and phone
number.
3
Follow the rest of the instructions for "Adding Phonebook Entries" on
page 46.
54
nextel.com