Hose And Cable Lengths; Levelling The Washing Machine - Panasonic NA-168VX2 Operating Instructions & Installation Instructions

Hose and cable lengths

How to connect for the left side

Levelling the washing machine

● Using a level facilitates the adjustment.
● When adjusting the washing machine to make it level, ensure all four stands are
supporting it:
A
● To adjust the stands, use A side of the included spanner.
NA-168VX2_Eng.indb 35
~ 105 cm
~ 10 cm
~ 100 cm
1
2
3
Lock nut
4
Stand
B
How to connect for the right side
~ 15 cm
~ 90 cm
~ 140 cm
On each stand, loosen the lock nut by
turning it clockwise using the A end of
the spanner supplied.
Adjust all four stands in this way.
Use a spirit level to ensure the
washing machine is standing
correctly.
Tighten each lock nut by turning it
anti-clockwise (towards the washing
machine body), again using the A end
of the spanner supplied.
Ensure all four lock nuts are
tightened securely. Check
the stands are still bolted
to the washing machine
– if they're unbolted, the
washing machine will move
around.
5
2010-1-26 13:06:00