Setting Date/Time (Clock Set) - Panasonic LUMIX DMC-FX40 Operating Instructions Manual

Setting Date/Time (Clock Set)

•
The clock is not set when the camera is shipped.
Turn the camera on.
A [MENU/SET] button
B Cursor buttons
Press [MENU/SET].
Press 3/4 to select the language, and press [MENU/SET].
•
The [PLEASE SET THE CLOCK] message appears. (This message does not appear in
[PLAYBACK] mode.)
Press [MENU/SET].
Press 2/1 to select the items (year, month,
day, hour, minute, display sequence or time
display format), and press 3/4 to set.
A: Time at the home area
B: Time at the travel destination
‚: Cancel without setting the clock.
•
Select either [24HRS] or [AM/PM] for the time display
format.
•
AM/PM is displayed when [AM/PM] is selected.
•
When [AM/PM] is selected as the time display format, midnight is displayed as AM
12:00 and noon is displayed as PM 12:00. This display format is common in the US and
elsewhere.
Press [MENU/SET] to set.
•
After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to recording mode, and check that the display reflects the settings that were
performed.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
below.
Preparation
(P82)
"
Changing the clock setting
- 18 -
OFF ON
MENU
/SET
:
:
"
procedure