Radio Operations; Automatic Presetting; Selecting Channels - Panasonic SC-EN17 Operating Instructions Manual

Radio operations

Radio stations can be tuned manually by selecting the station's frequency or they can be preset into channels to make it easy to tune.
You can preset up to 20 FM channels and up to 12 AM channels.
Allocation settings
For units with GCS printed on the outer packaging
Each country allocates broadcast bands according to their particular system.
You can change the AM step. The step is factory-set to 9 kHz, but you can
change it to receive broadcasts allocated 10-kHz steps.
Any AM frequencies preset in channels will be changed by this procedure.
Preset them again.
TUNER BAND
1. Select the FM band with [TUNER/BAND].
2. Press and hold [TUNER/BAND] on the unit.
After a few seconds the display changes to show the current minimum
frequency. Continue to hold the button down. The minimum frequency
changes and the step is changed.
To return to the original step, repeat the above steps.
To improve reception
FM
Extend the whip antenna and
adjust its direction.
If noise is excessive in FM
You can improve FM reception by switching reception to monaural.
PLAY MODE
Press to turn the MONO
mode ON/OFF
Main unit
Manual
TUNER BAND
tuning
Select"FM" or "AM"
Remote control
TUNER/
BAND
Select "FM" or "AM"
TUNER BAND
To adjust the volume
VOLUME
0
(Minimum)
AM
Change the direction and location
of the AM loop antenna.
MONO
Select the frequency
3
4
u i
Select the frequency
LIGHT DISPLAY
SLEEP
1
CLOCK/
TIMER ADJ
4
TIMER
SET/CHECK
7
PGM/CLEAR
-AUTO PRESET
AUX
TUNER/
BAND
VOL
EXTRA SOUND LIVE
D.BASS EQ VIRTUALIZER
50
ALBUM
(Maximum)
Main unit
Auto
TUNER BAND
tuning
Select"FM" or "AM"
Remote control
Select "FM" or "AM"
• Auto tuning stops when it finds a station.
• To cancel auto tuning press the same button again.
Note
• Auto tuning may not function when there is
excessive interference.
Perform once for FM stations and once for AM stations.
Automatic
presetting
Select "FM" or "AM"
The tuner
presets the
Note
stations it can
During automatic presetting, the memory indicator
receive into
(
PGM
channels in
memory
ascending order.
displayed for a second when a station is preset.
The first station to be preset is displayed when
presetting finishes.
Manual
Tune to
the station
presetting
you want
Preset the
to set as
the preset.
stations one at a
time.
Note
The station occupying a channel is erased if another
station is preset over that channel.
Selecting
channels
Select "FM" or "AM"
Select "FM" or "AM"
4
OPEN/
CLOSE
2 3
5 6
Input using the numbered
buttons
8 9
To select a 2-digit number
>
0 10
=
> =
e.g. 11: [ 10] → [1] → [1]
CD
To adjust the volume
VOL
PLAY
MODE
Press and hold until the
frequency starts changing
rapidly
3
TUNER/
BAND
u
Press and hold until the
frequency starts changing
rapidly
PGM/CLEAR
TUNER/
BAND
-AUTO PRESET
Press and hold until
"AUTO" appears
) flashes and the frequency scrolls. The
indicator and channel
Within 10 seconds
PGM/CLEAR
-AUTO PRESET
Enter preset mode
Select a channel
PGM
Select a channel
Select a channel
4
i
numbers are
1 2 3
4 5 6
7 8 9
0 > 10
=