Page of 8

SANYO RM-6860 Instruction Manual

Am/fm digital alarm clock radio.
Hide thumbs
   

Advertising

Advertising

RM-6860
INSTRUCTION MANUAL
AM/FM Digital Alarm Clock Radio

Advertising

   Related Manuals for SANYO RM-6860

   Summary of Contents for SANYO RM-6860

  • Page 1

    RM-6860 INSTRUCTION MANUAL AM/FM Digital Alarm Clock Radio...

  • Page 2

    Fig. 1 CAUTION: THE APPARATUS SHALL NOT BE EX- POSED TO DRIPPING OR SPLASHING. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. The rating label is located on the bottom of the unit.

  • Page 3

    PRECAUTIONS Keep the radio away from heating appliances and electric sources that could cause static on the radio such as fluorescent lamps and motors. Do not play your earphone at a high volume level. Hearing experts advise against continuous extended play. If you experience a ringing in your ears, reduce the volume or discontinues use.

  • Page 4: Power Supply

    BACK-UP BATTERY INSTALLATION (Fig. 2) Connect a standard 9V (006P/6F22) battery (not included) to the snap-on terminal match- ing the polarity. NOTE: If the time display is blinking when the mains returns after a failure, the back-up battery is exhausted and must be replaced. BATTERY BACK-UP SYSTEM This unit incorporates a battery back-up system which protects the clock, sleep timer and wake-up alarm functions from the mains failure with the battery installed.

  • Page 5: Listening To The Radio, Setting The Alarm

    LISTENING TO THE RADIO 1. Set the RADIO AUX/ON/OFF switch to ON. 2. Set the BAND switch to AM or FM. 3. Turn the TUNING control to tune in a station. 4. Adjust the VOLUME control as desired. 5. To turn the radio off, set the RADIO AUX/ON/OFF switch to OFF. Aerials For AM reception, rotate or relocate the unit to a different position to improve the recep- tion of a distant or weak station.

  • Page 6: Using The Alarm

    USING THE ALARM 1. If you want to wake up with the radio, tune in the station and adjust the volume level first. 2. Set the wake-up time. (See “SETTING THE ALARM”.) 3. Set the ALARM BUZZ/RADIO//OFF switch to ALARM-RADIO or ALARM-BUZZER. ALARM 1/2-RADIO: Wake up with the radio ALARM 1/2 -BUZZER: Wake up with the buzzer.

  • Page 7: Using The Sleep Timer

    USING THE SLEEP TIMER Set the RADIO AUX/ON/OFF switch to OFF. Push the SLEEP button. “0:59” (59 minutes) appears. The radio turns on and will turn off automatically after 59 minutes. - To select the desired time, while holding the SLEEP button down, push the FAST UP or SLOW DOWN button repeatedly to select the sleep time.

  • Page 8: Specifications

    SPECIFICATIONS Output power: Power consumption: Approx. 150 x 55 x 144 mm 350 m Watts (AC max.) Speaker 6 cm Tuning ranges: Specifications subject to change without AM: 510- 1650kHz notice. FM: 87 - 108.5 MHz Antennas: Built-in ferrite bar and antenna lead wire Power source: AC: 230 V, 50 Hz...

Comments to this Manuals

Symbols: 0
Latest comments: