Page of 8

SANYO RM-5750 Instruction Manual

Am/fm digital alarm clock radio.
Hide thumbs
   

Advertising

Advertising

RM-5750
INSTRUCTION MANUAL
AM/FM Digital Alarm Clock Radio

Advertising

   Related Manuals for SANYO RM-5750

   Summary of Contents for SANYO RM-5750

  • Page 1

    RM-5750 INSTRUCTION MANUAL AM/FM Digital Alarm Clock Radio...

  • Page 2

    Fig. 1 CAUTION: THE APPARATUS SHALL NOT BE EX- POSED TO DRIPPING OR SPLASHING. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. The rating label is located on the bottom of the unit.

  • Page 3

    PRECAUTIONS Keep the radio away from heating appliances and electric sources that could cause static on the radio such as fluorescent lamps and motors. Do not play your earphone at a high volume level. Hearing experts advise against continuous extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

  • Page 4: Power Supply

    BACK-UP BATTERY INSTALLATION (Fig. 2) Connect a standard 9V (006P/6F22) battery (not included) to the snap-on terminal match- ing the polarity. NOTE: If the time display is blinking when the mains returns after a failure, the back-up battery is exhausted and must be replaced. BATTERY BACK-UP SYSTEM This unit incorporates a battery back-up system which protects the clock, sleep timer and wake-up alarm functions from the mains failure with the battery installed.

  • Page 5: Listening To The Radio, Setting The Alarm

    LISTENING TO THE RADIO 1. Set the RADIO AUX/ON/OFF switch to ON. 2. Set the BAND switch to AM or FM. 3. Turn the TUNING control to tune in a station. 4. Adjust the VOLUME control as desired. 5. To turn the radio off, set the RADIO AUX/ON/OFF switch to OFF. Aerials For AM reception, rotate or relocate the unit to a different position to improve the recep- tion of a distant or weak station.

  • Page 6: Using The Alarm

    USING THE ALARM If you want to alarm with the radio, tune in the station and adjust the volume level first. Set the alarm time. (See “ALARM TIME SETTING”.) Set the ALARM BUZZ/RADIO/OFF switch to ALARM-RADIO or ALARM-BUZZER. ALARM-RADIO: Alarm by the radio ALARM-BUZZER: Alarm by the buzzer.

  • Page 7: Using The Sleep Timer

    USING THE SLEEP TIMER Set the RADIO AUX/ON/OFF switch to OFF. Push the SLEEP button. “0:59” (59 minutes) appears. The radio turns on and will turn off automatically after 59 minutes. To select the desired time, while holding the SLEEP button down, push the HOUR (once) or MINUTE button repeatedly to select the sleep time (up to 1 hour and 59 minutes).

  • Page 8: Specifications

    SPECIFICATIONS Output power: Power consumption: Approx. 150 x 55 x 144 mm 350 m Watts (AC max.) Speaker 6 cm Tuning ranges: Specifications subject to change without AM: 510- 1650kHz notice. FM: 87 - 108.5 MHz Antennas: Built-in ferrite bar and antenna lead wire Power source: AC: 230 V, 50 Hz...

Comments to this Manuals

Symbols: 0
Latest comments: