Sanyo LCD-22VT10DVD Instruction Manual page 19

Use " " or " " buttons to highlight the Time Zone
Setting. Time Zone Setting is set using " " or " "
buttons. It can be set to AUTO or MANUAL. When
AUTO is selected, Current Time and Time Zone
options will not be available to be set.
If MANUAL option is selected as the Time Zone
Setting, Time Zone can be altered:
• By pressing " " or " " buttons select Time Zone.
Use " " or " " buttons to change the Time Zone
between GMT-12 or GMT+12. Current Time on the
top of the menu list will then change according to
the selected Time Zone.
Receiver Upgrade
Over Air Download (OAD)
To ensure that your TV always has the most up to date
information, use this setting. Please ensure that the TV
is set to standby mode. The TV automatically
powers up at 3.00 A.M. each day and searches for
any new information which may be broadcast and
will download this to your receiver automatically. This
operation will normally take approximately 30 minutes.
If you have an important recording to be carried out at
3.00 A.M. and you do not want to interrupt it, disable
auto OAD search by performing the following:
• Press MENU button and using the " " or " " buttons
to choose Setup and press OK button.
• Highlight Confi guration menu with " " or " " keys
and press OK.
• Use " " or " " buttons to choose "RECEIVER
UPGRADE" and press OK button.
• Using the " " or " " button change "Automatic
scanning" from Enabled to Disabled.
• Highlight "Scan for upgrade" menu with " " or "
"keys and pres OK to commence upgrade.
• After the search progress is completed, the message
" Completed searching for upgrade. No new software
was found" appears on the screen if no new software
is found.
Dolby Digital
In the Configuration Menu, highlight the Dolby D item
by pressing " " or " " buttons. Use the " " or " "
buttons to set the Dolby Digital as On or Off. If the
channel that you are watching supports Dolby Digital
and Dolby Digital Plus, you can turn this setting on.
Hard of Hearing (*)
Use " " or " " button to select Hard of Hearing and
then press " " or " " button to set this setting as
On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
(*) Hard of Hearing function will not be available for UK.
Channel List
Use " " or " " buttons to go to Channel List option.
Use or buttons to toggle Channel List Mode. If you
select "TV Only", with the " " or " " buttons, you
navigate through only TV channels. If you select
"Radio Only", with the " " or " " buttons, you
navigate through only radio channels. If you select
"Text Only", with the " " or " " buttons, you navigate
through only text channels. If you choose "Show All"
all channels can be navigated. To save the recent
changes and exit; press the MENU button.
Digital Audio Out
Use this setting to defi ne digital audio out signal type.
Use " " or " " buttons to set Digital audio out as
AC3 or PCM.
If your selected channel includes AC3 sound stream,
you should connect your TV to external equipment
by using Spdif out of your TV for enabling the sound
output.If you have no external sound equipment,
please select Digital Audio Out as "PCM" by using "
" or " " button.
A/V Delay
You can use this setting when there is an AV
synchronization problem in the received broadcast.
Press " " or " " button to change the delay.
Audio Description
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media. You can use this feature, only if the broadcaster
supports that additional narration track. Use " " or
" " buttons to select an item. Then use " " or " "
buttons to set.
Audio Description
This function enables or disables the audio description
feature by pressing the " " or " "buttons.
English - 17 -