Name/Function Of Each Part - Sanyo HEC-DR7700 Instruction Manual

NAME/FUNCTION OF EACH PART

Seat
Sensor controller
Remote control
Stand
Installed on either side of
the arm rest.
Foot rest slide lever
Cord
Grounding pin
Power plug
Check the accessories
Cover A
at first.
Caster
Used when moving
the chair.
LOCK switch
Used to lock the power switch
for safety, inorder not to turn on
Stand
the power switch by mistake.
POWER switch
Used to turn on/off the power
Installation screws source.
(3 screws)
5
Remote control
Head cover
Åñ All display icons are shown here
for explanation.
Back rest
MANUAL SELECT button
Used for manual massaging.
Massaging rollers
MANUAL (UPPER BODY)
MASSAGE button
Back pad
Used to select the desired type
of upper body massaging.
MANUAL (LOWER BODY)
Arm rest
MASSAGE button
Used to select the desired type
of lower body (air) massaging.
Cover B
COVER
Opened when you want
manual massaging.
Foot rest
WIDTH ADJUST button
Adjusts the width of the
massaging rollers in five stages.
SPEED ADJUST button
Adjusts the speed of the massaging rollers in five stages.
AUTOMATIC COURSE button
Used to select the desired type of Automatic Course.
WHOLE BODY SENSOR AUTOMATIC COURSE button
Used to select the desired type of Whole Body Sensor Automatic Course.
OPERATION ON/OFF button
Used for switching the massaging operation ON/OFF.
POSITION ADJUST button
Used to adjust the UP/DOWN position of massaging rollers.
FOOT REST button
Adjusts the angle of the foot rest.
RECLINING button
Adjusts the angle between the back rest and the foot rest.
The back rest and foot rest are moved in conjunction with each other.
HOME POSITION button
Used to return the back rest, foot rest and seat to
their home position.
ZERO-G button
Used to adjust the back rest, foot rest and seat to
the two preset types of reclining angle.
INSTANT STOP button
Used if you have felt abnormal physical sensation
or want to stop the massager immediately.
UPPER BODY STRENGTH ADJUST button
Adjusts the strength of upper body massaging
in five stages.
LOWER BODY STRENGTH ADJUST button
Adjusts the strength of lower body and
air course massaging in three stages.
Only during the Whole Body Sensor
Automatic Course, the lower body
massaging can be turned off.
SOLE WARMER button
Used for switching the sole heater
operation ON/OFF. (When the heater
switch is "ON", the lamp is illuminated.)
6