Operation Instructions - Sanyo EM-S6786V Instruction Manual

OPERATION INSTRUCTION
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs for the better cooking.
1.Clock Setting
When the microwave oven is electrified, the oven will display "0:00", buzzer will ring once.
1) Press " Clock/Pre-set " , the hour figure flash.
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
Clock/Pre-set
3) Press "
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
Clock/Pre-set
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press " Stop/Clear ", the oven
will go back to the previous status automatically.
2. Microwave Cooking
1) Press the "Microwave " key once, and "P100" display. Microwave
Microwave
2) Press "
"P100", "P80", "P50", "P30", "P10" will display in order.
3) Press "Start/Express cook" to confirm.
4)Turn " " to adjust the cooking time. (The time setting should be 0:05- 95:00.)
Start/Express cook
5) Press "
NOTE: the increased time for the adjustment operation of the coding switch is as follow.
0---1 min
1---5 min
5---10 min
10---30 min
30---95 min
For example, when the cooking time is within 0 and 1 minutes, the cooking time will
increase 5 seconds if you turn the coding switch once.
Microwave Power Chart
Microwave Power
Display
3. Express Cook
1) In waiting state, press "
seconds. Each press on the same key can increase 30 seconds. The maximum cooking
time is 95 minutes.
2) During the microwave process, press "
time.
", the minute figures will flash.
" to finish clock setting. ":" will flash.
" or turn " " to select the microwave power from100% to 10%.
" to start cooking.
: 5 seconds
: 10 seconds
: 30 seconds
: 1 minutes
: 5 minutes
100% 80%
P100 P80
Start/Express cook
50%
30%
P50 P30
" key to cook with 100% power level for 30
Start/Express cook
10
10%
P10
" to increase the cooking