Sanyo KMHS0972 User Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Air Conditioner
  5. KMHS0972
  6. User manual
Sanyo KMHS0972 User Manual

Sanyo KMHS0972 User Manual

Hide thumbs Also See for KMHS0972:
Table of Contents

Advertisement

Quick Links

See also: Technical & Service Manual , Instruction and Installation Manual
01_KMHS0972_EN.fm Page 2 Monday, October 17, 2005 10:54 AM
This air conditioner is an inverter type unit that automatically adjusts capacity as appropriate. Details on these functions
are provided below; refer to these descriptions when using the air conditioner.
•
Microprocessor Controlled Operation
The interior compartment of the remote control unit
contains several features to facilitate automatic
operation, easy logically displayed for easy use.
•
Simple One-touch Wireless Remote Control
The remote control unit has several features to
facilitate automatic operation.
•
24-Hour ON or OFF Timer
This timer can be set to automatically turn the unit
on or off at any time within a 24 hour period.
•
1-Hour OFF Timer
This timer can be set to automatically turn off the
unit at any time after one hour.
•
Night Setback
Pressing this button changes the setting of the
room temperature thermostat, allowing you to set
the temperature at whatever level that you find
comfortable.
•
Automatic and 3-step Fan Speed
Auto/High/Medium/Low
•
Air Sweep Control
This function moves a flap up and down in the air
outlet, directing air in a sweeping motion around the
room and providing comfort in every corner.
•
Auto. Flap Control
This automatically sets the flap to the optimum
position during heating, cooling, and drying
operation.
2

Features

•
Hot Start Heating System
•
Automatic Restart Function for Power Failure
•
High Power Operation
•
Quiet Operation
•
ION Operation
•
Anti-Mold Filter
•
Air Clean Filter
Right from the start, the air is warm and
comfortable. This system prevents any cold blasts
at the beginning while the heat pump is warming
up, or even defrosting.
Even when power failure occurs, preset
programmed operation can be reactivated once
power resumes.
If not in Auto Operation, the unit operates at
maximum output for 30 minutes, regardless of the
desired temperature.
The fan speed is 1 step above "High".
The fan rotates slower than the fan speed setting to
provide a quieter operating sound.
While it is operating, the unit generates negative
ions that freshen up the air in the room.
This unit is equipped with an anti-mold filter that
inhibits the growth of mold and bacteria.
An air filter that eliminates unpleasant odors and
cleans the air is available.
Purchase a replacement filter at your local dealer.
(model STK-FDXB)
OI-808-2-EG

Advertisement

Table of Contents
loading

Related Manuals for Sanyo KMHS0972

Summary of Contents for Sanyo KMHS0972

  • Page 1: Features

    01_KMHS0972_EN.fm Page 2 Monday, October 17, 2005 10:54 AM Features This air conditioner is an inverter type unit that automatically adjusts capacity as appropriate. Details on these functions are provided below; refer to these descriptions when using the air conditioner. •...

  • Page 2: Table Of Contents

    01_KMHS0972_EN.fm Page 3 Monday, October 17, 2005 10:54 AM Contents Page Features ........................2 Product Information....................3 Alert Symbols......................3 Installation Location ....................4 Electrical Requirements ...................4 Safety Instructions....................4 Names of Parts ......................5 Using the Remote Control Unit ................10 Operation with the Remote Control Unit ..............12 1.

  • Page 3: Installation Location

    01_KMHS0972_EN.fm Page 4 Monday, October 17, 2005 10:54 AM Installation Location • We recommend that this air conditioner be installed properly by qualified installation technicians in accordance with the Installation Instructions provided with the unit. • Before installation, check that the voltage of the electric supply in your home or office is the same as the voltage shown on the nameplate.

  • Page 4: Names Of Parts

    01_KMHS0972_EN.fm Page 5 Monday, October 17, 2005 10:54 AM Names of Parts Air intakes INDOOR UNIT Air outlet Remote control unit Drain hose Refrigerant tubes OUTDOOR UNIT Air outlet This illustration is based on the external view of a standard model. NOTE Consequently, the shape may differ from that of the air conditioner which you have selected.

  • Page 5: Unit Display And Operation Button

    01_KMHS0972_EN.fm Page 6 Monday, October 17, 2005 10:54 AM Unit Display and Operation Button INDOOR UNIT IMPORTANT OPERATION lamp TIMER lamp Avoid using radio equipment QUIET lamp QUIET such as mobile phone near ION lamp (within 4 ft.) the remote control receiver.

  • Page 6: Remote Control Unit (Display)

    01_KMHS0972_EN.fm Page 7 Monday, October 17, 2005 10:54 AM Remote Control Unit (Display) Displayed when transmitting data Displayed when indoor unit sensor is in use Displayed when setting temperature Displayed when temperature is shown Displayed when setting timer Displayed when the time display is set to 12-hour time.

  • Page 7: Remote Control Unit

    01_KMHS0972_EN.fm Page 8 Monday, October 17, 2005 10:54 AM Remote Control Unit Sensor Transmitter (Cover closed) Display ON/OFF operation button ION button 1 HR. TIMER button Temperature setting buttons (TEMP.) QUIET button MODE selector button FAN SPEED selector button NIGHT SETBACK button FLAP button HIGH POWER button ON TIME...
  • Page 8 01_KMHS0972_EN.fm Page 9 Wednesday, November 2, 2005 10:21 AM Remote Control Unit (continued) Temperature setting buttons Press the button to increase the set temperature. (TEMP.) Press the button to reduce the set temperature. The temperature setting changes by 1 °C or 2 °F each time one of the TEMP. buttons is pressed.

  • Page 9: Using The Remote Control Unit

    01_KMHS0972_EN.fm Page 10 Monday, October 17, 2005 10:54 AM Remote Control Unit (continued) SENSOR button When you press this button (use a small-tipped object such as a ballpoint pen), mark will appear at the display. And the room temperature is detected by the sensor which is built into the indoor unit and the air conditioner is controlled accordingly.
  • Page 10 01_KMHS0972_EN.fm Page 11 Monday, October 17, 2005 10:54 AM Using the Remote Control Unit (continued) How to Use the Remote When using the remote control unit, always point the unit’s transmitter head Control Unit directly at the air conditioner’s receiver. Air conditioner (Indoor unit) Receiver...

  • Page 11: Operation With The Remote Control Unit

    01_KMHS0972_EN.fm Page 12 Monday, October 17, 2005 10:54 AM Operation with the Remote Control Unit 1. Automatic Operation The air conditioner calculates the difference between the thermostat setting and room temperature, and automatically selects ‘‘COOL’’ or ‘‘HEAT’’ mode as appropriate. STEP 2 STEP 1 Check that the circuit breaker on the power panel is turned on.

  • Page 12: Manual Operation

    01_KMHS0972_EN.fm Page 13 Monday, October 17, 2005 10:54 AM Operation with the Remote Control Unit (continued) 2. Manual Operation STEP 2 STEP 3 STEP 1 STEP 4 STEP 5 Check that the circuit breaker on the power panel is turned on. NOTE If the automatic operation settings of the unit do not meet your needs, press the setting buttons as described below and change the settings as desired.

  • Page 13: Adjusting The Fan Speed

    01_KMHS0972_EN.fm Page 14 Monday, October 17, 2005 10:54 AM Operation with the Remote Control Unit (continued) NOTE • Choose the best position in the room for the remote control unit, which also acts as the sensor for room comfort and transmits the operating instructions. Once you’ve found this best position, always keep the remote control unit there.

  • Page 14: Night Setback Mode

    01_KMHS0972_EN.fm Page 15 Monday, October 17, 2005 10:54 AM Operation with the Remote Control Unit (continued) 4. Night Setback Mode Night Setback Mode is used for saving energy. Press the NIGHT SETBACK button while operation. mark appears in the display. To release the night setback function, press the NIGHT SETBACK button again.

  • Page 15: Quiet Mode

    01_KMHS0972_EN.fm Page 16 Monday, October 17, 2005 10:54 AM Operation with the Remote Control Unit (continued) 5. QUIET Mode QUIET Mode is used to reduce the fan sound of the indoor unit. Press the QUIET button. mark appears in the display. To cancel, press QUIET button again.

  • Page 16: Special Remarks

    01_KMHS0972_EN.fm Page 17 Monday, October 17, 2005 10:54 AM Special Remarks ‘‘DRY’’ ( ) Operation How it works? • Once the room temperature reaches the level that was set, the unit’s operation frequency is changed automatically. • During DRY operation, the fan speed automatically runs at lower speed for providing a comfortable breeze.

  • Page 17: Setting The Timer

    01_KMHS0972_EN.fm Page 18 Monday, October 17, 2005 10:54 AM Setting the Timer In the descriptions below, the following settings are used for the temperature and NOTE time indicator selector button on the bottom front section of the remote control. • Temperature: °F •...
  • Page 18 01_KMHS0972_EN.fm Page 19 Monday, October 17, 2005 10:54 AM Setting the Timer (continued) 3. How to set the ON time (Example) To start operation at 7:10 am. Operation Indication 1. Press the ON TIME setting The timer indication is button once. displayed, and the present ON time is shown.

  • Page 19: Using The 1-Hour Off Timer

    01_KMHS0972_EN.fm Page 20 Monday, October 17, 2005 10:54 AM Using the 1-Hour OFF Timer 1. 1-Hour OFF Timer This function causes the unit to operate for one hour and then stop, regardless of whether the unit is on or off when this button is pressed. indicator in the display indicates that this function is operating.

  • Page 20: Adjusting The Airflow Direction

    01_KMHS0972_EN.fm Page 21 Monday, October 17, 2005 10:54 AM Adjusting the Airflow Direction 1. Horizontal The horizontal airflow can be adjusted by moving the vertical vanes with your hands to the left or right. When the humidity is high, the vertical vanes should be in the front CAUTION position during the cooling or dehumidifying operation.

  • Page 21: Operation Without The Remote Control Unit

    01_KMHS0972_EN.fm Page 22 Monday, October 17, 2005 10:54 AM Operation without the Remote Control Unit INDOOR UNIT If you have lost the remote control unit or it has trouble, follow the steps below. When the air conditioner is not running Each time the OPERATION button is pressed, the type of operation conducted is indicated by the changing color of the OPERATION lamp.
  • Page 22 01_KMHS0972_EN.fm Page 23 Monday, October 17, 2005 10:54 AM Care and Cleaning (continued) Anti-Mold Filter The anti-mold filter behind the air intake grille should be checked and cleaned at least once every two weeks. How to remove the anti-mold 1. Grasp both ends of the air Air intake grille filter intake grille, and remove it by...
  • Page 23 01_KMHS0972_EN.fm Page 24 Monday, October 17, 2005 10:54 AM Care and Cleaning (continued) Air Clean Filter The air clean filter removes dust and dirt from the air, and reduces odors and smoke from tobacco. This air clean filter cannot remove harmful gases or vapors nor ventilate air in the room.

  • Page 24: Troubleshooting

    01_KMHS0972_EN.fm Page 25 Monday, October 17, 2005 10:54 AM Troubleshooting If your air conditioner does not work properly, first check the following points before requesting service. If it still does not work properly, contact your dealer or service center. Trouble Possible Cause Remedy Air conditioner does not run at all.

Table of Contents