Setting Up Default Setting - Sanyo PLC-XU116 Owner's Manual

Setting up default setting

The monitoring information and e-mail information can be set up by the procedure below.
1
Select
2
Switch by clicking
Monitoring information
Monitoring information
Items Description
Monitoring interval ................Sets up the interval of the polling in minute unit. (1 to 99 minutes can be set)
Temperature unit Sets up the display temperature unit Centigrade or Fahrenheit.
.....................
Event reception process..........Sets up the treatment when the event (ALERT, TRAP, SYSERR) happens on the target.
For further information, refer to the item "About event treatment" ( p.26).
from
Sound warning alarm
Send e-mail
Display warning dialog
menu. The setting window will appear.
or
Setting up default setting
tab for each setting.
PJ NETWORK MANAGER
OWNER'S MANUAL
17