Setting Up The Password Of Telnet; Setting Commands Batch Processing For Multiple Targets - Sanyo PLC-XU116 Owner's Manual

Setting up the password of Telnet

The password of telnet can be set up by the procedure below. It is necessary to make a
password, same as the network password.
1
Select a target which you want to set up the password of telnet from the status list. You
can select multiple targets.
2
Select
below figure. Set a password and click
the selected targets are set as the same password.

Setting commands batch processing for multiple targets

The commands batch processing for multiple targets can be set up by the procedure
below.
1
Select a target belonging to the batch processing group which you want to set, and
select
dialog box will appear as the below figure.
2
Select a command which you want to set, click
log box will appear. Select a parameter, and then click
3
Click button. The commands are carried out to all the targets of the same group.
The commands also work for the target which is not set to a group.
from menu,
button. When multiple targets are selected, all
from
dialog box will be checked.
Setting up the password of Telnet
dialog box will appear as the
The initial setting is "0000".
menu.
button.
button. The check box of
PJ NETWORK MANAGER
dia-
15
OWNER'S MANUAL