Connections; Ac Cord Connection And Fi Xing, Cable Fi Xing; Video Equipment Connection - Panasonic TH-42LF25ER Operating Instructions Manual

Connections

AC cord connection and fi xing, cable fi xing
Cable fi xing
Fix the cable in place using the bead band attached to the display.
1 Remove the bead band
Bead band

Video equipment connection

SERIAL
Control the Display by
connecting to PC
(see page 12)
8
AC cord fi xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
2
Bundle the cables
Remove
AV IN
HDMI1, HDMI2
HDMI Input Terminal
(see page 10)
AV IN
VIDEO
Composite Video Input Terminal
S-VIDEO
S-VIDEO Input Terminal
(see page 9)
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet fi rst.
3
Stopper
Bundle the cables
DVI-D IN
DVI-D Input Terminal
(see page 10)
PC IN
PC Input Terminal
(see page 11).
Attach the bead band
Pass through to
the back
COMPONENT/RGB IN
Component/RGB Video
Input Terminal
(see page 9)