Download Print this page
American Standard Champion 4 Right Height Elongated Total Toilet 2586.000 Specification Sheet
American Standard Champion 4 Right Height Elongated Total Toilet 2586.000 Specification Sheet

American Standard Champion 4 Right Height Elongated Total Toilet 2586.000 Specification Sheet

Champion 4 right height elongated total toilet

Advertisement

Quick Links

CHAMPION
4 RIGHT HEIGHT™
®
ELONGATED TOTAL TOILET
2586.000
• Vitreous china
• EverClean
surface inhibits the growth of stain
®
and odor causing bacteria, mold and mildew
on the surface
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® 4 Flushing System
performance platform
• 4" non-adjustable, piston action Accelerator™
flush valve
• 16-1/2" rim height for accessible applications
• Elongated siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Speed Connect
tank/bowl coupling system
®
• Chrome-plated trip lever
• Sweeping pier on bowl
• 100% factory flush tested
• 2 bolt caps
• Color-matched plastic toilet seat
and cover with EverClean
• Wax ring gasket with closet bolts
• 10 year warranty
Nominal Dimensions:
772 x 464 x 825mm
(30-3/8" x 18-1/4" x 32-1/2")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability - July, 2003 revision
To Be Specified:
❏ Color: ❏ White
❏ Supply with stop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
© 2008 AS America Inc.
®
surface
CHAMPION
ELONGATED TOTAL TOILET
FINISHED WALL
772mm
(30-3/8)
32mm ± 6mm
(1-1/4 ± 1/4)
235mm
(9-1/4)
470mm
(18-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
16mm
(5/8)
264mm
362mm
(10-3/8)
(14-1/4)
305mm
C/L OF OUTLET
(12)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
K105
4 RIGHT HEIGHT™
®
VITREOUS CHINA
464mm
(18-1/4)
356mm
(14)
SUPPLY
AS
REQ'D
419mm
(16-1/2)
*
254mm
(10)
152mm
(6)
FINISHED
FLOOR
254mm
(10)
Revised 2/08
825mm
(32-1/2)

Advertisement

loading