NAD M50 Owner's Manual page 7

4 Select "Configure WiFi".
5 Select your home network or applicable wireless network name (SSID)
from the "Configure wireless" drop down menu.
6
8
6 Enter your home network's Wireless Password (Passphrase, WEP/WAP
key as applicable) in the field "Enter password or key (if protected)".
The Password (Passphrase, WEP/WAP key as applicable) is the same
Password that was setup or generated during the configuration of
your home router or gateway. An incorrect password entered in the
"Configure wireless" menu screen will simply cause the unit to timeout
and return to Hotspot Mode.
Trying multiple passwords will not damage the device in any way. If
you are not sure what is your Password, login to your router and locate
the Password in the applicable setup screen for Wireless Configuration
section. Refer to your router's documentation for further information.
7 Select a "Player name" from the drop down list or use the on-screen
keyboard to create a customized room name in the field "Custom
name".
8 Select "Update" and wait for the VFD to show
Ready
Your M50 is now connected to your home network and ready to be
used with the NAD M50 controller App.
DOWNLOAD THE APP
Use your iPad to download and install the free NAD M50 App from the
iTunes App Store. Select the NAD M50 App to open the NAD M50 Control
Panel.
CONNECT TO MUSIC
You're ready to stream Internet Radio!
• Go to the Music Sources menu by tapping the
icon.
• Launch
and select your favorite radio station from anywhere on
the planet. Live!
To play music stored on a computer or NAS device,
• Select the Settings icon
display.
• Choose "Configure Player" from the pop-up menu, and then "Configure
network shares".
5
• Follow the screen prompts, and open your whole home to the pleasure
of streaming HiFi music.
7
GETTING STARTED
(Sources) menu
on the upper right corner of the iPad
7