Remote Control - NAD M50 Owner's Manual

IDENTIFICATION OF CONTROLS
1
AES/ HDM I
CO AX
EBU 1
HDM I
USB OPT
2
SETUP EQ POL AR.
2
DIM DISP MENU
CD
NET W
3
ENTER
USB USB
1
VO LUME
MUTE
4
RPT RAND
5
1 2 3
4 5 6
7 8 9
0
12

REMOTE CONTROL

1 ON: Switch M50 from Standby mode to operating mode.
OFF: Switch M50 to standby mode.
2 DISP: Display information about current track, file or song.
MENU: Display main menu.
3 D/F/A/S: Navigate or select through menu items or options.
ENTER: Confirm selected option. Go to next option.
CD: Select CD mode.
USB 1: Select Front USB source.
4 RPT: Repeat playback of current track or file. Repeat playback of whole disc or playlist.
RAND: Play tracks/files in random order.
5 [k]: Eject loaded disc.
[;]: Pause playback temporarily.
2
[0]: Go to next track or file.
[9]: Go to the beginning of current track or file.
[4]: Start playback.
Only above buttons are compatible with M50. Other available buttons are not applicable for M50 or
are non-functional.
IMPORTANT NOTICE ABOUT M50 REMOTE CONTROL
The M50 remote control can be used for either M51 Direct Digital DAC or M50 Digital Music
Player. By undertaking the following steps, the M50 remote control can be defaulted for use by
either M51 or M50.
For M50: Press and hold "5" and "0" at the same time until the remote control's blue transmit LED
flashes twice.
For M51: Press and hold "5" and "1" at the same time until the remote control's blue transmit LED
flashes twice.
Release the corresponding buttons above as soon as the blue transmit LED flashed twice.