[Photo Frame]; [Underwater]; Registering Commonly Used Scenes; [My Scene Mode] - Panasonic Lumix DMC-TZ10 Operating Instructions Manual

Taking pictures according to the scene
(Continued)
[SCENE MODE]
Recording Mode:
Scene Uses, Tips
A frame is superimposed over the image.
Press ◄► to select the frame, and then press
[MENU/SET].
[PHOTO
FRAME]
Achieve natural colours under water.
Tips
• For fast moving subjects, align with the AF
area and press ◄ (AF Lock).
(Press ◄ again to release.)
• If the zoom is operated after AF Lock is set,
the AF Lock setting will be cancelled and must
be set again.
• AF Lock cannot be set if [AF MODE] is set

[UNDERWATER]

to .
• Adjust red and blue levels with 'White Balance
fine adjustment' (→98).
• Focus (same as macro recording)
Max. W: 3 cm (0.10 feet) and above
Max. T: 1 m (3.28 feet) and above
(5 × to 8 × is 2 m to ∞)
70
VQT2R48
Notes
• The recording pixel level is 2 M
( ).
• The following function is fixed:
[AUTO REVIEW]: [2 SEC.]
• The colour of the frame displayed
on the screen may differ slightly
from the colour of the frame on
the still picture that is recorded.
• Guide lines cannot be displayed.
• The following functions are not
available.
Extra Optical Zoom/[DIGITAL
ZOOM]/[AUTO BRACKET]/
[MULTI ASPECT]/[BURST]
• Always use marine case
(optional).
• Positioning is not possible
underwater, because the GPS
signals cannot reach the camera.
• Self-timer: Cannot be used
[AF LOCK]
(focus fixed)
AF area

Registering commonly used scenes

[MY SCN MODE]/[MY SCENE MODE]
Recording Mode:
You can register a commonly used Scene Mode in
dial.
After the settings are made, pictures can be taken in the preset Scene Mode by simply
setting the mode dial to ( for
Zoom lever
[DISPLAY]
[MENU/SET]
■
Taking pictures in
registered Scene Modes
Set the mode dial to (
for ), and take a picture.
• Functions, tips for each scene
(→62 - 70)
■
Changing registered Scene
Modes
Perform the registration operation
again
■
Taking motion pictures
(→72)
●
and
Both represent the same function. Frequently-used scenes can be preset to each
position so that you can quickly and easily switch to the desired Scene Mode.
●
For details on the preset scenes, see the pages on Scene Modes.
●
If recording settings are reset by [RESET] in the [SETUP] menu, the preset Scene
Modes are cleared.
( for ) on the mode
).
Set to
Set to / ( for )
DMC-TZ10 DMC-TZ8 If you have already
registered in My
DMC-ZS7 DMC-ZS5
Scene Mode, it
is displayed as a
registered scene.
Select and set the scene
(Press [MENU/SET], select , and then
press ►, if the scene menu is not displayed.)
●
Scene menu
The zoom lever
can also be used
to switch to the
next screen.
To see a description of a scene:
Select the scene, and press [DISPLAY].
VQT2R48
71