Slide Show - Panasonic LumixDMC-FZ45 Operating Instructions Manual

∫ Operations performed during
The cursor displayed during playback is the same as 3/4/2/1.
•
The menu screen is restored when [‚] is pressed.
A Play/Pause
B Stop
C Back to previous picture
D Ahead to next picture
¢ These operations can be performed only in the Pause Mode or during
Motion Picture playback.
E Reduce volume level
F Increase volume level
∫ Changing the slide show settings
You can change the settings for slide show playback by selecting
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects when switching from
one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen
effect.
•
[AUTO] can be used only when [CATEGORY SELECTION] has been selected. The pictures
are played back with the recommended effects in each category.
•
[EFFECT] is set to [OFF] when playing a slide show with motion pictures only.
•
Some [EFFECT] settings will not operate when playing back pictures displayed vertically.
[SETUP]
[DURATION] or [REPEAT] can be set.
Item
[DURATION]
[REPEAT]
[SOUND]
•
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.
Note
•
It is not possible to add new music.
Advanced (Playback)

slide show

¢
¢
1SEC./2SEC./3SEC./5SEC.
OFF/ON
[OFF]: There will be no sound.
[AUTO]: Music is played when the still pictures are played
back, and audio is played when the motion pictures
are played back.
[MUSIC]: Music is played back.
[AUDIO]: Audio (only for motion pictures) is played back.
- 151 -
Settings
W T