Advertisement
Specifications
Torque Range
20-150 ft-lb
Drive
1/2"
Length
18"
Accuracy
±4%
Save This manual
Keep this manual for the safety warnings and
precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write
the product's serial number in the back of the
manual near the assembly diagram (or month
and year of purchase if product has no
number). Keep this manual and the receipt
in a safe and dry place for future reference.
Important Safety Information
In this manual, on the labeling, and all other
information provided with this product:
This is the safety alert symbol.
It is used to alert you to potential
personal injury hazards. Obey
all safety messages that
follow this symbol to avoid
possible injury or death.
DanGeR indicates a hazardous
situation which, if not avoided, will
result in death or serious injury.
WaRnInG indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CauTIOn, used with the safety alert
symbol, indicates a hazardous situation
which, if not avoided, could result
in minor or moderate injury.
Page 2
For technical questions, please call 1-800-444-3353.
nOTICe is used to address practices
not related to personal injury.
CauTIOn, without the safety alert
symbol, is used to address practices
not related to personal injury.
Safety Warnings
WaRnInG Read all safety warnings
and instructions. Failure to follow the
warnings and instructions may result in
serious injury.
Save all warnings and instructions
for future reference.
1. The warnings, cautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.
3. Use only within rated torque range.
Do not use for loosening.
4. Use as intended only. Do not use as
hammer or pry bar. Do not use handle
extension to increase force. Do not drop.
5. Inspect before every use; do not use
if damaged or if parts are loose.
6. Keep away from children.
7. For your safety, service, calibration,
and maintenance should be performed
regularly by a qualified technician.
8. Use only sockets with the correct
drive and rated to at least the
torque that will be applied to it.
SKU 00239
Advertisement
