Handling Cautions; Maintenance Of Cabinet - Samsung BD-C8500 User Manual

Bd-hdd combo
Hide thumbs Also See for BD-C8500:
Table of Contents

Advertisement

Available languages

Available languages

If you move your product suddenly from a cold
place to a warm place, condensation may
generate on the operating parts and lens and
cause abnormal disc playback. If this occurs,
wait for two hours before connecting the plug to
the power outlet.
Then insert the disc and try to play back again.
HDD (Hard Disk Drive)
The hard disk has a high storage density, which
enables long recording durations and quick
access to written data. However, it can easily be
damaged by shock, vibration or dust and should
be kept away from magnets.
To avoid losing important data, observe the
following precautions.
Do not use the BD-HDD Combo in a place
subject to extreme changes in temperature.
Do not apply a strong shock to the BD-HDD
Combo.
Do not place the BD-HDD Combo in a location
subject to mechanical vibrations or in an
unstable location.
Do not place the BD-HDD Combo on top of a
heat source.
Do not disconnect the AC power cord while the
power is on.
Do not attempt to change the hard disk. This
may result in a malfunction.
Should the hard disk be damaged, you cannot
recover lost data. The hard disk is only a
temporary storage space.

Handling Cautions

Do not write on the printed side with a ball-point
pen or pencil.
Do not use record cleaning sprays or antistatic.
Also, do not use volatile chemicals, such as
benzene or thinner.
Do not apply labels or stickers to discs. (Do not
use discs fixed with exposed tape adhesive or
leftover peeled-off stickers.)
Do not use scratch-proof protectors or covers.
Do not use discs printed with label printers
available on the market.
Do not load warped or cracked discs.
Before connecting other components to this
product, be sure to turn them all off.
Do not move the product while a disc is being
played as the disc may be scratched or broken,
or the product's internal parts may be damaged.
Do not put a flower vase filled with water or any
small metal objects on the product.
Be careful not to put your hand into the disc
tray.
Do not place anything other than the disc in the
disc tray.
Exterior interferences such as lightning and
static electricity can affect the normal operation
of this product. If this occurs, turn the product
off and on again with the POWER button, or
disconnect and then reconnect the AC power
cord to the AC power outlet. The product will
operate normally.
Be sure to remove the disc and turn off the
product after use.
Disconnect the AC power cord from the AC
outlet when you don't intend to use the product
for long periods of time.
To clean a disc, wipe it in a straight
line from the inside to the outside of
the disc.
Do not expose the product to any
liquid.
When the AC plug is connected to a wall outlet,
the product will still draw power (standby mode)
when it is turned off.
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
The main plug is used as a disconnect device
and shall stay readily operable at any time.

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC
power cord from the AC outlet.
Do not use benzene, thinner, or other solvents
for cleaning.
Wipe the cabinet with a soft cloth.

English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bd-c8200

Table of Contents