Samsung SyncMaster F2370H User Manual page 35

THE COLOR IS DISPLAYED IN 16 BIT (16 COLORS). THE COLOR HAS BEEN CHANGED AFTER CHANGING THE
Did you install the device driver for the product?
Is the graphics card configured correctly?
WHEN I CONNECT THE MONITOR, THE 'UNKNOWN MONITOR, PLUG&PLAY (VESA DDC) MONITOR FOUND'
Did you install the device driver for the product?
Check if all the Plug&Play (VESA DDC) functions are sup-
ported referring to the User Manual of the graphics card.
WHEN I LOOK AT THE EXTERIOR EDGES OF THE PRODUCT, SMALL ALIEN SUBSTANCES APPEAR ON IT.
Since this product is designed so that the color has a soft appearance by coating it with a transparent material over the black
edges, such things may be seen. This is not a defect of the product.
A "BEEP, BEEP" SOUND IS HEARD WHEN BOOTING THE COMPUTER.
If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer.
Troubleshooting
GRAPHICS CARD.
Windows ME/XP/2000 : Set the color again by selecting Con-
→
trol Panel
Windows Vista : Change the color settings by selecting " Con-
trol Panel" → "Appearance and Personalization"→"Personal-
ization"→" Resolution".
Windows 7 : Change the color settings by selecting "Control
Panel" → "Personalization"→"Display"→"Change display set-
tings"→"Advanced settings"→"Monitor".
Configure the color again in accordance with the new graph-
ics card driver.
MESSAGE IS DISPLAYED.
Install the device driver referring to the descriptions about the
driver installation.
Install the device driver referring to the descriptions about the
driver installation.
→
Display Settings.
5-2